Production

PRODUCTION AT GIURGIU:

Workshops of about 10.200 sqm.
4 independent production flows
500 tons/month total capacity

1) MANUFACTURING STRUCTURES:

VASIFRAL 46 SRL produces metal structures for construction projects and industrial equipment.
Our team and its reference works represent the guarantee that we offer best quality services. We achieve this by having qualified personnel and experienced partners in the meccanical field.
The objective is to deliver products that correspond to the technological and dimensional requests according to client’s specification,by meeting the agreed delivery terms.

a. CUTTING, ROLLING PLATES AND METAL PROFILES

The cutting of plates and metal profiles is done with the help of automatic equipment using specific software that allows the elimination of dimensional deviations.
CUT SHEET Plasma: Thickness: 60 mm
Pantograph for oxy cuttig with numerical control Dimensions of cutting plan: 2500x12000 mm.
Bending machine with Lenght:2.000/4.000m and Thickness. 10/70 mm
Bending machine with Lenght:3.500/4.050 and Thickness: 15/6 mm

b. ASSEMBLY AND WELDING OF METAL STRUCTURES:

The assembly and welding of the parts is done only by qualified personnel, carefully supervised by the personnel from the Quality Control and Assurance department. These operations consist in the actual joining of the cut and drilled metal parts.
After performing these processes, the elements are pre-assembled for a check and assurance that they are machined correctly and there will be no deviations in the site.

c. SANDING AND PAINTING OF METAL STRUCTURES:

Sandblasting and painting of metal elements is performed with qualified personnel using conventional equipment and aireless pumps, under the supervision of the process coordinator and the staff of the quality assurance (QA) department. Depending on the requirements of the beneficiary, alkyd, epoxy, polyurethane or other solutions can be used to obtain paint layer thicknesses according to the standards in the projects.
Shotblasting machine with 6 turbines for finishing grade till to ad sa 3. max treating dimensions Width 1.700 mm highness 3.000 mm lenght 16.000 mm.
Shotblasting covered area equal to 860 sqm for finishing grade till to ad sa 2.5. max treating dimensions Width 24.000 mm highness 6.000 mm lenght 36.000 mm.
Local painting of extension equal to 2.000 sqm (20x100), covered, with 1 bridgecranes of 5 ton.

d. GALVANIZATION OF METAL STRUCTURES:

Thermal or electrolytic galvanizing of metal structures can be done with the help of our partners in this field at international standards.

e. PACKAGING OF ITEMS:

After the completion of all the processes for each element, the visual control is performed in order to start the packaging of the structures and the delivery to the beneficiaries.
The packaging process is performed according to customer requirements and the standards specified in the projects.

PRODUCTION AT INTORSATURA BUZAULUI:

13.500 sqm total production area (equipped with travelling cranes of 1 to 12,5 tons)
4 independent production flows
300 tons/month total capacity

1) MANUFACTURING STRUCTURES:

VASIFRAL 46 SRL produces metal structures for construction projects and industrial equipment.
Our team and its reference works represent the guarantee that we offer best quality services. We achieve this by having qualified personnel and experienced partners in the meccanical field.
The objective is to deliver products that correspond to the technological and dimensional requests according to client’s specification,by meeting the agreed delivery terms.

a. CUTTING, ROLLING PLATES AND METAL PROFILES

The cutting of plates and metal profiles is done with the help of automatic equipment using specific software that allows the elimination of dimensional deviations.
CUT SHEET Plasma: Thickness: 60 mm
Pantograph for oxy cuttig with numerical control Dimensions of cutting plan: 2500x12000 mm.
Bending machine with Lenght:2.000/4.000m and Thickness. 10/70 mm
Bending machine with Lenght:3.500/4.050 and Thickness: 15/6 mm

b. ASSEMBLY AND WELDING OF METAL STRUCTURES:

The assembly and welding of the parts is done only by qualified personnel, carefully supervised by the personnel from the Quality Control and Assurance department. These operations consist in the actual joining of the cut and drilled metal parts.
After performing these processes, the elements are pre-assembled for a check and assurance that they are machined correctly and there will be no deviations in the site.

c. SANDING AND PAINTING OF METAL STRUCTURES:

Sandblasting and painting of metal elements is performed with qualified personnel using conventional equipment and aireless pumps, under the supervision of the process coordinator and the staff of the quality assurance (QA) department. Depending on the requirements of the beneficiary, alkyd, epoxy, polyurethane or other solutions can be used to obtain paint layer thicknesses according to the standards in the projects.
Shotblasting machine with 6 turbines for finishing grade till to ad sa 3. max treating dimensions Width 1.700 mm highness 3.000 mm lenght 16.000 mm.
Shotblasting covered area equal to 860 sqm for finishing grade till to ad sa 2.5. max treating dimensions Width 24.000 mm highness 6.000 mm lenght 36.000 mm.
Local painting of extension equal to 2.000 sqm (20x100), covered, with 1 bridgecranes of 5 ton.

d. GALVANIZATION OF METAL STRUCTURES:

Thermal or electrolytic galvanizing of metal structures can be done with the help of our partners in this field at international standards.

e. PACKAGING OF ITEMS:

After the completion of all the processes for each element, the visual control is performed in order to start the packaging of the structures and the delivery to the beneficiaries.
The packaging process is performed according to customer requirements and the standards specified in the projects.